Home Environmental technologies Products & Solutions

Floating Aerators

Floating Aerators

Roxia Floating Aerator™ is a turbine surface aerator for the treatment of industrial and municipal wastewater.
  • High efficiency
  • Low energy consumption
  • Easy & fast installation
  • Low initial investment
  • Effective water circulation
Get a Quote

Efficient Turbine Surface Aerator

Roxia Floating Aerator™ is a turbine surface aerator for the treatment of industrial and municipal wastewater. It brings together high efficiency, low initial investment and low energy consumption. Aeration of wastewater or natural waters is effective with no need for complex infrastructure or heavy installations, keeping the costs and maintenance low.

High Efficiency & Low Costs

Roxia Floating Aerator efficiently transfers and disperses oxygen into the wastewater. The floating design allows fast and easy installation without costly construction. The aerator’s features bring together high efficiency, low initial investment, and low energy consumption.

Wastewater aeration does not need a complex infrastructure. Roxia Floating Aerator is an effective and cost-efficient solution.

Effective water circulation

Under-water intake pipe is optimized according to the water depth. This ensures efficient mixing of oxygen-enriched water.

Clogging prevention

Wide intake pipe and simple construction keep the maintenance minimal.

No compressed air

Lower investment and operation costs, no need for expensive compressor and diffuser infrastructure

Focus areas

P&P, chemical, food, beverage

Mining wastewaters

Decentralized wastewater treatment, point source treatment

Landfill leachate

Target applications

Aeration basins and lagoons

Equalization tanks, pre-aeration

Retrofit and replacement projects

Odour control

Simultaneous cooling of hot industrial waters

Would you like to find out if Floating Aerator is suitable for your application?

Fill in the contact form and our wastewater treatment professionals will advise you.

Get Advice Now

Read case studies

Case studyAeration solved odour problem

  • No more odour problem caused by low oxygen level
  • Freezing problem eliminated
  • Improved discharged water quality
Customer

EKJH Waste Management Company

Solution

Five 1,5 kW Roxia Floating Aerators

Application

Water aeration in the equalization basin

Aeration Solved Odour Problem

Technical data

Roxia Floating Aerator 1,5 kW

Oxygen transfer efficiency Up to 2,2 kgO2/kWh*
Spray pattern diameter Appr. 3,5 m
Motor 3-phase customized motor manufactured by Lönne or equal
Nominal power 1,5 kW
Efficiency class IE2
Insulation class H
V/F 400V +- 5%, 50Hz
Electrical cable 4G2,5 European standard cable. Note: Length and local electrical control system may affect. When using AC-drive EMC-cable or shielded cable is required
Main dimensions 1000 mm x 1000 mm x 550 mm
Weight of aerator with floats Appr. 40 – 50 kg
Materials AISI 316 (shaft and other metal parts) , Impeller aluminum, Float PUR-plastic , Intake pipe** PE-Plastic

 

* Oxygen measurement accuracy ± 15%
** Customer must define the length of the intake pipe (the pipe should be 0,6 – 2,0 m above the bottom of the basin, depends on basins material).

Optional features

  • Frequency converter (AC-drive)
  • Protection class IP20 or IP55
  • Automatic impeller cleaning cycle feature
  • Metal parts AISI 304
  • Intake pipe screen
  • Lifting hook
  • Return channel (to deep lakes)
  • Cooling fan
  • Lights

Roxia Floating Aerator 3 kW

Oxygen transfer efficiency Up to 2,0 kgO2/kWh*
Spray pattern diameter Appr. 4,5 m
Motor 3-phase customized motor manufactured by Lönne or equal
Nominal power 3 kW
Efficiency class IE2- / IE3
Insulation class H
V/F 400V +- 5%, 50Hz
Electrical cable 4G2,5 European standard cable. Note: Length and local electrical control system may affect. When using AC-drive EMC-cable or shielded cable is required
Main dimensions 1200 mm x 1200 mm x 800 mm
Weight of aerator with floats Appr. 110 kg
Materials AISI 316 (shaft and other metal parts) , Impeller aluminum, Float PUR-plastic , Intake pipe** PE-Plastic * Oxygen measurement accuracy ± 15%

 

* Oxygen measurement accuracy ± 15%
** Customer must define the length of the intake pipe (the pipe should be 1,0 – 2,5 m above the bottom of the basin, depends on basins material).

Optional features

  • Frequency converter (AC-drive)
  • Protection class IP20 or IP55
  • Automatic impeller cleaning cycle feature
  • Metal parts AISI 304
  • Intake pipe screen
  • Lifting hook
  • Return channel (to deep lakes)
  • Cooling fan
  • Lights

Related products & solutions

Plasma Oxidizer

Superb water purification system alternative to ozone, UV and chemical treatment.

Plasma Oxidizer

Testing and Piloting Services

Testing and piloting services for industrial waters: flocculation test, coagulation test, COD wastewater testing and more.

Testing and Piloting Services

Contact us

If you have something on your mind, just let us know! We are more than happy to answer all your inquiries.

Oops! We could not locate your form.

Lyle Henson

Sales Manager North America

+1 443 695 9510

Pyry Kupias

Technical Product Manager

+358 40 721 8919

Maija Mehto

Technical Account Manager

+358 50 534 3211

Simo Manninen

+358 40 576 2635